Anchor clamp for Main line 4AN

Anchor clamps for self supporting LV-ABC lines

Send Inquiry


Anchor clamp for Main line 4AN

Description of Anchor clamp for overhead line

Anchor clamp for overhead line.The dead end clamp for overhead line is designed to anchor insulated service lines with 2 or 4 conductors to the pole or wall. The anchor clamp is composed of a body, wedges and removable and adjustable bail or pad. One core Anchor clamps are design to supporting the neutral messenger,the wedge can be self-adjusting. Pilot wires or street lighting conductor are led alongside the clamp. The self opening is featured by an integrate spring facilities for easily insert the conductor into the clamp. Standard: NFC 33-042.

Material of dead end clamp for overhead line

The clamp body, the main mechanical component is manufactured in heavy duty weatherproof synthetic material.
The wedge, made from synthetic material exerts necessary mechanical pressure in retaining the cable in the body of the clamp.
The pull hook is made from anti corrosion rod.
For anchoring isolated coaxial and unipolar cables.



Models 4AN25.50 4AN50.120 4AN16.50H 4AN50.120H
Cable range (mm²) 4×25-50 4×50-120 4×16-50 4×50-120
Cable diameter(mm) 8 ~ 14 14-16 8 ~ 14 14-16
Core No. 4 4 4 4
MBL(daN) 2000 2000 2000 3500
Remarks M12 close bolt M12 close bolt  M12 close bolt, Heavy   M12 close bolt, Heavy 

Related Product

Anchor clamp for Main line

Feature of anchor clamp

1.Simple and fast installation requiring no tools.
2.Suits to all field configurations.
3.Possible to mount on pole line hardware with open or closed eye.
4.Mechanical traction resistant.
5.Supports industrial duty tension.
6.Corrosion resistant.

For the correct installing anchor clamp, the following steps are recommended:

  • Loosen the mooring hook from the anchor clamp.
  • Place the hook en the place to be mooring point or support, fixing it inside the body of the clamp
  • Remove the wedge from its base and then place the cable within the clamp.
  • Replace the wedge to its corresponding position and proceed to tense the cable taut.