Telecommunications
Fiber Optical ADSS Cable Accessories

CROP Advantage

  • 11 Years Production Experience 

  • OEM & ODM Service

  • Free Sample Supply

  • On Time Delivery 

  • QC

Telecommunication ADSS cable accessories

Anchoring clamp wedge type PA-05
Cable diameter: 3-7mm
Anchoring clamp wedge type PA-02
Cable diameter: 3-7mm
Anchoring clamp PA-01
Anchoring clamp wedge type PA-01
Cable diameter: 6-8mm
fiber optic cable clamp
Wedge clamp plastic AD series
Cable diameter: 10-18mm
Anchoring clamp PA69S
Anchoring clamp wedge type PA-69
Cable diameter: 5-9mm
Anchoring clamp PA1500
Anchoring clamp wedge type PA-1500
Cable diameter: 8-12mm
Anchoring clamp PA2000
Anchoring clamp wedge type PA-2000
Cable diameter: 12-15mm
aluminum wedge clamp
 Wedge clamp aluminum PA series
Cable diameter: 7-20mm
adss anchor clamp
 Wedge clamp aluminum APA series
Cable diameter: 3-10mm
adss tension clamp
 Wedge clamp aluminum PA-M series
Cable diameter: 3-9mm
wedge clamp connector
 Wedge clamp aluminum PA series
Cable diameter: 8-18mm
Suspension clamp
J hook suspension clamp HC series
Cable diameter: 5-20mm
suspension clamp
J hook suspension clamp PS series
Cable diameter: 6-27mm
Suspension grip for ADSS
ADSS Cable suspension clamp
 
insulator tie
Insulator tie
 
Down lead clamp
 Down lead clamp
Bracket
Anchoring clamp bracket BR7
Bracket
Anchoring clamp bracket BR8
Anchoring clamp Bracket
Anchoring clamp bracket BR2
Wedge clamp bracket
Anchoring clamp bracket BR13

What is ADSS cable ?

ADSS (All-Dielectric Self-Supporting) cable is ideal for installation in distribution as well as transmission environments, even when live-line installations are required. 

As its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass, making ADSS an economical and simple means of 

achieving a fiber optic network.

ADSS cable

Telecommunicate ADSS cable accessories classification

1.Preformed Tension Clamp For ADSS Cable

2.Preformed Suspension Clamp for ADSS Cable

3.Anchoring clamp for round ADSS cable

4.Anchoring clamp for Fig-8 ADSS cable

5.Suspension clamp for ADSS cables

6.Stainless steel band and buckle

7.Horse clamp

8.Bracket

1.Preformed Tension Clamp For ADSS Cable

Preformed tension Clamps are designed to connect continue pole (tower) and Terminal pole(tower), tensile pole or line angles above 25° Pole (tower). The special 

specification: one unit per Terminal pole (tower), two units per tensile pole (tower), two units per continue pole (tower).Armor rods can provide protection and cushioning 

to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so as to ensure the normal

lifetime of cables system.You can select the Specification Model corresponding to the appropriate cable diameter range, maximum allowable tension (MAT) or Span Length

 from Data Sheet.

 

Preformed Tension Clamp

1.1 Low Tensile force Tension Clamp for ADSS Cable

The tension clamp is single preformed rods structure, simple and reliable ,convenient and quick installation, It is specially designed for short span length low tensile 

force ADSS cables.

Technical Data:

Grip Force:3KN

Recommended Span Length:≤50m

DN(1.5Kn-5Kn):1PC, YK-OK-01:1PC,TC-005:1PC.

 

Low Tensile force Tension Clamp
Type Work suspension load
kN
MBL
KN
Diameter clamped cable
mm
Reinforced rod L
mm
DN-1.5(3) 1.5 3 4-9 No 300-360
DN-3(5) 3 5 4-9 No 300-360

Technical Data:

Grip Force: 15KN

Recommended Span Length:≤100m

DN(6KN-15KN):1PC,TC-01:1PC,PRT-7-1:1PC,CK-7-1A:1PC,YKN-02:1PC.

Tension Clamp
Type Work suspension load
kN
MBL
KN
Diameter clamped cable
mm
Reinforced rod L
mm
DN-6(10) 6 10 9-20.9 No 500-800
DN-9(15) 9 15 9-20.9 No 600-1000

1.2 Middle and Low Tensile Force Tension Clamp for ADSS Cable

Technical Data:

Grip Force: 7-25KN

Recommended Span Length:≤200m

DNR:1unit,TC-03:1PC,PRT-7-1:1PC,CK-7-1A:1PC,YKN-02:1PC.

Middle and Low Tensile Force Tension Clamp
Type Work suspension load
kN
Length cable span
m
Diameter clamped cable
mm
Reinforced rod L
mm
DNR-7(12) 7 12 9.0-20.9 Yes 800-1000
DNR-10(17) 10 17 9.0-20.9 Yes 800-1200
DNR-15(25) 15 25 9.0-20.9 Yes 800-1200

Tension Clamp accembly

Preformed Tension Clamp accembly

2. Preformed Suspension Clamp for ADSS Cable

The Preformed Suspension Clamp is the connecting hardware of ADSS cable which hanging in transmission line pole (tower). It can reduce static stress at the support point, improve cable ant-vibration ability, and cushioned against the dynamic stress of Aeolian vibration. as well as ensure that the cable bending will not exceed the permissible values, make the cable does not produce bending stress, so that the fiber optic don’t produce extra loss in the cables.

Structure and Material:

Thimble—Hot dip galvanized steel. Thimble is designed to bear gravity and to hang on the pole.

Armor Rods—– Galvanized steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.

Accessories: B16:1PC, TP-01:1PC, AX:1PC.

preformed Suspension Clamp

2.1 Short Span Tangential Suspension Clamp for ADSS Cable

Technical Data:

Recommended Span Length: ≤50m

YKP-02:1pc, TP-01:1PC, SG-50:1PC.

 

Tangential Suspension Clamp
Type Work suspension load
kN
Length of cable span
m
Diameter clamped cable
mm
Reinforced rod L
mm
SG-50 2 <50 6.6-20.9 No 500
One set of suspension clamp include one thimble and one helical.

2.2 Middle Short Span Tangential Suspension Clamp For ADSS Cable (With Armor Rods)

Technical Data:

Work suspension load:<10kN 

Recommended Span Length: ≤110m

YKP-02:1pc, TP-01:1PC, SGR:1Unit.

Tangential Suspension Clamp
Type Work suspension load
kN
Length of cable span
m
Diameter clamped cable
mm
Reinforced rod L
mm
SGR-110 <10 <110 6.6-20.9 Yes 800-1200
One set of Middle Short Span Suspension Clamp include one thimble,one helical and an unit of protector.

2.3 Middle Short Span Tangential Suspension Clamp For ADSS Cable (With Armor Rods)

Technical Data:

Work suspension load: <10kN

Recommended Span Length: ≤500m

YKP-02:1pc, TP-03:1PC, CK-7-1A:1PC, SGR:1Unit.

Tangential Suspension Clamp
Type Work suspension load
kN
Length of cable span
m
Diameter clamped cable
mm
Reinforced rod L
mm
SGR-500 <10 <500 10-20.9 Yes 800-1200

2.3 Big Span Tangential Suspension Clamp For ADSS Cable

Technical Data:

Work suspension load: <70kN

Recommended Span Length: ≤500m

KP-16:1PC,CK-12-1A:1pc, PRT-7-1:1PC,TS-07:1PC, SGR:1Unit.

angential Suspension Clamp
Type Work suspension load
kN
Length of cable span
m
Diameter clamped cable
mm
Reinforced rod L
mm
SGR-700 <70 <500 14-20.9 Yes 800-1200

3.Anchoring clamp for round ADSS cable

PRODUCT OVERVIEW:
These clamps are designed for dead-ending aerial ADSS cables on access networks. Different capacities are available to adapt to the cable Ø.These anchoring clamps are made of an opened Aluminum body, a pair of plastic wedges,and a flexible bail equipped with an insulating thimble. The bail can be locked onto the clamp body once passed through the pole bracket and re-opened by hand at any time,when the clamp is not under full load. All parts are secured together to prevent any loss during installation. 

APPLICATION:

These clamps will be used as cable dead-end at end poles (using one clamp).Two clamps can be installed as double dead-end in the following cases :

1.at jointing poles

2.at intermediate angle poles when the cable route deviates by more than 20°.

3.at intermediate poles when the two spans are different in lengths.

4.at intermediate poles on hilly landscapes.

FEATURES:

1.Dead-ending of 8 to 18 mm ADSS cables

2.Minimum breaking load of 10 Kn

3.Installation on any pole hardware fitting :brackets, cross-arms or eye bolt with a min eye Ø of 15 mm

4.All plastic parts are UV resistant and tested in conditions equivalent to min 25 years of service in tropical environment.

 

Anchoring clamp for round ADSS cable
Models PA-1000-* PA-1500-* PA-2000-*
Cable range (mm2) 25-35 50-70 70-95
Cable diameter(mm) 8~11 11~14 14~18
Core No. 1 1 1
MBL (daN) 1000 1500 2200
stainless steel banding accessories