Description
Bimetallic IPC Connector Insulation Piercing Connector
Bimetallic IPC connector insulation piercing connector is used to tap or splice the aerial bundle cable.It is mainly composed of an insulating shell, a puncture blade, a waterproof rubber pad, and a torque bolt. Copper tinned puncture blade can be connect the copper conductor or aluminum conductor,the aluminum blade can be connect the aluminum conductor.
| Models | PCT13C 95/10 | PCT13CB 95/10 |
|---|---|---|
| Main Line(mm2) | 6-95 | 6-95 |
| Service Line (mm2) | 1.5-10 | (B) 1.5-10 |
| Bolt No. | 1 | 1 |
| Torque (Nm) | 10NM | 10NM |
| Remarks | ISO to ISO | ISO to Bare |
| Models | PCT13C 70/35 | PCT13C 95/50 | PCT13C 120/25 | PCT13C 150/50 | PCT13C 185/35 | PCT13CB 70/35 | PCT13CB 95/50 |
|---|---|---|---|---|---|---|---|
| Main Line(mm2) | 16-70 | 16-95 | 25-120 | 50-150 | 50-185 | 16-70 | 16-95 |
| Service Line (mm2) | 4-35 | 4-50 | 6-25 | 4-50 | 6-35 | (B)4-35 | (B)4-50 |
| Bolt No. | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Torque (Nm) | 15NM | 17NM | 17NM | 17NM | 17NM | 15NM | 17NM |
| Remarks | ISO to ISO | ISO to ISO | ISO to ISO | ISO to ISO | ISO to ISO | ISO to Bare | ISO to Bare |
| Models | PCT13C 95/95 | PCT13C 150/150 | PCT13CB 95/95 | PCT13CB 150/150 |
|---|---|---|---|---|
| Main Line(mm2) | 16-95 | 16-150 | 16-95 | 16-150 |
| Service Line (mm2) | 16-95 | 16-150 | (B)16-95 | (B)16-150 |
| Bolt No. | 1 | 1 | 1 | 1 |
| Torque (Nm) | 17-23NM | 23NM | 23NM | 23NM |
| Remarks | ISO to ISO | ISO to ISO | ISO to Bare | ISO to Bare |
Installation
When making a cable branch connection, insert the branch cable into the branch cap and determine the position of the main line branch, use a socket wrench to tighten the torque nut on the clamp. As the torque nut is tightened, the upper and lower two insulators with piercing blades hidden in the clamp Gradually close, at the same time, the arc-shaped sealing rubber pad wrapped around the piercing blade gradually adheres to the cable insulation layer, and the piercing blade also begins to pierce the cable insulation layer and metal conductors. When the sealing degree of the sealing rubber gasket and the insulating grease and the contact between the piercing blade and the metal body reach the best effect, the torque nut will automatically fall off. At this time, the installation is completed and the contact point sealing and electrical effect reach the best.
