Insulation Piercing Connector PCT13C Series

Insulation Piercing Connector PCT13C  Function: Tap a small wire off of a large wire A convenient and fast way to safely and securely tap off of an existing line. You can tap off of the middle a line that is from #6 gauge wire to 4/0 cable to feed a 14 AWG to #10 awg wire. You do not have to cut or interrupt the main line. Install with the power shut off to the main line. Standard: IEC 61284, EN 50483, IRAM2435, NFC33 020.

Send Inquiry
Category:
Description

Description

Insulation Piercing Connector

Description

Insulation piercing connector are suitable for majority types of LV ABC conductors as well as connections to service and lighting cable cores. When tightening the bolts, the teeth of the contact plates penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Tightening torque guaranteed(fuse nut). Stripping of insulation is avoided.
Service condition: <1kV, 50/60Hz, -10°C to 55°C
Standard: IEC 61284, EN 50483, IRAM2435, NFC33 020.

Suitable for Aluminum and copper conductors.

Remarks: ISO mean insulated conductor, BARE mean bare conductor.

Models PCT13C 120/10 PCT13CB 120/10
Main Line(mm²)  6-120  6-120
Service Line (mm²) 1.5-10 (B) 1.5-10
Bolt No. 1 1
Torque (Nm) 10NM 10NM
Remarks ISO to ISO ISO to Bare

Models PCT13C 70/35 PCT13C 95/50 PCT13C 120/25 PCT13C 150/50 PCT13C 185/35 PCT13CB 70/35 PCT13CB 95/50
Main Line(mm²) 16-70 16-95 25-120 50-150 50-185 16-70 16-95
Service Line (mm²) 4-35 4-50 6-25 4-50 6-35 (B)4-35 (B)4-50
Bolt No. 1 1 1 1 1 1 1
Torque (Nm) 15NM 17NM 17NM 17NM 17NM 15NM 17NM
Remarks ISO to ISO ISO to ISO ISO to ISO ISO to ISO ISO to ISO ISO to Bare ISO to Bare

Models PCT13C 95/95 PCT13C 150/150 PCT13CB 95/95 PCT13CB 150/150
Main Line(mm²) 16-95 16-150 16-95 16-150
Service Line (mm²) 16-95 16-150 (B)16-95 (B)16-150
Bolt No. 1 1 1 1
Torque (Nm) 17-23NM 23NM 23NM 23NM
Remarks ISO to ISO ISO to ISO ISO to Bare ISO to Bare

Material
Body:Weather and  UV resistant glass fiber reinforced polymer, Thermoplastic polyamide 66 with fiberglass
Connecting bridge: Copper tinned, Brass tinned, Al
Sealing parts: Flexible PVC
End cap: Flexible PVC
Grease: Silica gel
Bolt: Hot dip galvanized steel, 8.8 grade
Washer, Nut: Hot dip galvanized steel
Fuse nut: Zinc alloy

Features
• Tested for watertightness at a voltage of 6 kV for 30 min in a water bath
• Potential free tightening bolts allow safe installations on life lines
• Bimetallic, suitable for aluminium and copper conductors
• Long neck 13 mm shear head nut ensuring reliable installations
• Components not isolated, end cap attached to body
• Insulation material made of weather and UV resistant glass fibre reinforced polymer

Installing