Compresion sleeves for overhead insulated conductor JY series

Send Inquiry
分类:
描述

描述

Description of Mid span joint

Mid span joint are also named compresion sleeves,joint are used for splicing or repairing overhead insulated conductor of overhead transmission and distribution lines.Mid span joint provide a reliable,economical,and easy to install splicing method for overhead transmission and distribution lines.
joint compresion for ACSR conductor not only satisfy the basic tension requirements, but also deal with the problems of “cold flow” of aluminum and the oxide file which forms on the strands.The DC resistance of cable sleeve must be less than that of the equi-length conductor,the temperature rise of all mid span splice must be less than the splicing conductor.The slip strength of the splice connector must be less than 95% of the rated strength of conductor.

Features of compresion sleeves

Easy to install,just for use with CRIMP tools only.
For ACSR,compact,5005,6201 and ACAR partial tension (40% tension rating) conductor jumper splicing.
Aluminum alloy conductor recommendations include 5005 and ACAR having the same diameter as a given ACSR conductor shown below. In addition, compressed (compact) conductor sizes within the same decimal conductor range are recommended.

Suitable conductor of joint compresion

ACSR conductor

Material of joint

Joint of outer: Aluminum
Joint of inner: hot dip galvanized steel

Mid span joint, compresion sleeves,joint,sleeves,joint compresion
Item No. Conductor(mm2) Dimension(mm) Grip Strength
(kN)
D D1 d d1 L L1
JY-70/10 JKLYGJ70/10 26 110 13 4.5 360 110 21
JY-95/15 JKLYGJ95/15 26 130 15 5.7 430 130 31.5
JY-120/20 JKLYGJ120/20 30 130 16 6.2 430 130 36.9
JY-150/25 JKLYGJ150/25 30 150 18.5 7 500 150 48.7
JY-185/25 JKLYGJ185/25 32 150 20.5 7 520 150 53.5
JY-240/30 JKLYGJ240/30 36 170 23 7.9 570 170 68